System Integration

Options & Accessories

Home > Solutions > Two Way Radio Solution > Land Mobile > Digital > Technology & Products > P25 > Base Station & Repeaters > Accessories
none
none
 
P25 TB9100 - Options and Accessories

General Performance

Reciter
The reciter contains the receiver, exciter and network board, and has the following functions carried out via a state-of-the-art RISC processor and DSP:
Controlling base station/repeater operation
Storing the channel table and other configuration operation
Holding licenses for optional features
Collecting faults from other modules and generates alarms
Running Task Manager
 

Power Management Unit

The PA is available as 5W, 50W, and 100W modules, and receives the RF signal from the reciter to amplify it to the required level. The reciter controls the frequency based on its channel table and tells the PA what power level to use. The PA then waits for the key-up signal.

power factor corrected
can operate with mains supply from 88-264 V AC (no switching required)
DC supplies have floating inputs so the supply can be negatively or positively earthed
optional auxiliary power output (12, 28 & 48V at 40W) for powering external equipment
optional standby module for maximum power saving capability
   

Network Board

The Network Board provides comprehensive control of a Tait P25 system, including access to multiple interfaces such as Ethernet, line audio, digital inputs and outputs, and also a coaxial relay drive output, Tx Key, and Rx Gate.
 

Subrack, Front Panel, Control Panel

The TB9100 is enclosed in a subrack with a front panel and control panel. The passivated steel subrack is very compact at 4U high, and is designed to fit into a standard 19 inch rack or cabinet. The front panel incorporates the cooling fans for the PA and the PMU. The user can replace both the front panel and the individual fans if necessary. The control panel is mounted onto the subrack independently of the front panel. It features a microphone socket, controls keys, LEDs, speaker and volume control knob.
 

Software Licenses

Tait's TB9100 software licenses are used to enable advanced features of the base station/repeater. Licenses are applied on a per-feature and per-reciter basis. This software license system means that you can select and pay for those features that you need rather than buying a base station/repeater with many features you may not use. This gives you the flexibility to add extra features when you wish to simply by upgrading the software.
 
 
 
Follow us on
     
© 2012, Adino Telecom LTD. All Right reserved. Privacy Policy | Discliamer   K Webmaker ™